Hard Drive EMI Shield Cooler & Drive Cooler Solution

Hard drives are sometimes used and operated outside their native originally intended environments. For instance, when they are placed outside a computer case they can be exposed to EMI interfaces (electrical noise), and because of an inadequate cooling mechanism, the drive’s operating temperature can rise. 

Today’s high performance hard drives are more susceptible to EMI (electrical noise) and with high spinning motors (15,000 revolutions per minute) they can generate much more heat than the older drives. So to ensure their proper operation, ICS has introduced a new accessory that addresses the two concerns – electrical noise and heat.  

The new accessory is a Hard Drive EMI Shield Cooler. The hard drive slides into the metal sleeves without any need for mounting screws. Coupled with a powerful fan, on top of the device, the heat is dissipated and maintained at a comfortable operating temperature level, in which the hard drives can operate optimally. Additionally the metal sleeves, unlike inferior plastic devices, function as a shield against the EMI noise, to assure reliable operation in a safe environment.

.: Overall Dimensions: 6.5" x 4.25" x 1.6"

.: Net Wight: 0.8 lbs

Drive Cooler Solution for IM4008/4004 and WipeMASSter range

Hard drives are sometimes used and operated outside their native originally intended environments. For instance, when they are placed outside a computer case they lack an adequate cooling mechanism and the drive’s operating temperature can rise. Today’s high performance hard drives are spinning motors (15,000 revolutions per minute) and they can generate much more heat than the older drives. The fan, used with the IM4008, IM4004 and WipeMASSter, will cool down the hard drives and maintain a comfortable operating temperature level, in which the hard drives can operate optimally.

Note: This Drive Cooler Solution is designed to work with IM4008, IM4004 and WipeMASSter, not with the IM4002

The TDC1 Drive Cooler is an integral product in Tableau's new Modular Acquisition Accessory family. Developed to meet the cooling requirements for rotating Hard Disk Drives (HDD), the TDC1 offers features and connection advantages not found in other drive coolers.

TDC1 can be used to cool one or two hard drives, depending upon drive orientation. The TDC1's four cooling fans are controlled by the conveniently located top panel Power (ON/OFF) and Fan Speed buttons. TDC1 is designed as the base on which to connect the Tableau Drive Wiper (TDW1) and 1:1 Encryption Module (TE1). Electrical connections common to all Tableau Modular Acquisition Accessories enable quick, easy connections and eliminate the need for multiple cables and power supplies.

TDC1 comes with a TP3 high-output Power Supply.