IMSOLO 3 IT
Click the image for a pdf specification sheetHand-Held Model
Introducing the new SOLO 3 IT - The Ultimate PC Support Tool
Designed exclusively for IT support professionals, the ImageMASSter Solo 3 IT data imaging tool is a light weight, portable hand-held device that can copy data to one or two target drives at speeds up to 3GB/Min.
Solo 3 is configured to support 3.5” and 2.5” IDE plus the latest S-ATA drives. The advanced version of the Solo3 also incorporates high speed SCSI duplication for 50 pin, 68 pin fast wide and SCA drive interfaces.
Copying drives couldn’t be easier, simply plug in the master and target drives and press GO. All Microsoft operating systems can be copied using our patented IQ Copy mode which copies only the valid data. This very fast copy facility means that you can copy Win XP in less than two minutes, no matter what size drives you are using. Yes it takes the same time whether you are using 20GB or 200GB drives. In addition to Windows all other operating systems can be copied using one of the alternative copy modes.
In addition to copying direct from drive to drive the Solo 3 can also copy via Firewire or USB2 direct to a drive inside a desktop or laptop PC.
The important issue of data security is also addressed by the Solo 3 IT with its integral drive erasure software. Prior to disposing of PC’s you can easily erase and overwrite every sector on a hard drive ensuring that no data can be recovered. In addition to regular single overwrite mode the Solo 3 IT also incorporates the high security erasure DOD 5220M used by the United States Department of Defence.
Note: It's highly recommended to use the Hard Drive EMI Shield Cooler with the Solo 3 IT. This accessory will protect the hard drive from EMI noise while you clone hard drives and will reduce heat build-up of the hard drives.